Our site uses cookies necessary for its proper functioning. To improve your experience, other cookies may be used: you can choose to disable them. This can be changed at any time via the Cookies link at the bottom of the page.


News & Events

Media center
 
GF Solving water Loss for Life WebinarsGF Solving water Loss for Life Webinars

George Fischer Piping Systems are publishing a series of on-demand webinars on the important subject of how to minimize water loss from pipe networks. They have so far published 5 webinars covering...

Webinar : Benefits of PE100+ Material and their use in Trenchless TechnologyWebinar : Benefits of PE100+ Material and their use in Trenchless Technology

On march 10th, was held the PE 100+ ASSOCIATION first webinar. The webinar was a great success and attracted a large audience. 

NEW PRESIDENT PE100+ ASSOCIATIONNEW PRESIDENT PE100+ ASSOCIATION

PE100+ announces Robin Bresser (Borealis) has been appointed as the new President & Chairman of the Association as per February 9th, 2022. Robin has a long standing experience in the global...

PPCA conference papers summariesPPCA conference papers summaries

PPXX Conference was held in Amsterdam, September 6-8, 2021. The summaries of all presented papers can be found here, on PE100+ Association website. The full  papers and details can be found on the...

PE100+ Association first Webinar:Benefits of PE100+ Materials and their Use in Trenchless TechnologyPE100+ Association first Webinar:Benefits of PE100+ Materials and their Use in Trenchless Technology

Along with providing a brief introduction to the association, the webinar will focus on the benefits of using pre-compounded PE100 materials certified by the association and highlight some of the problems that can occur when such materials are not used. It will then give an introduction to the different trenchless (No-Dig) technologies that can used to install PE100 pipes and liners in challenging conditions whilst minimising the environmental impact of the installation. The webinar is aimed at technical staff working for utility organisations, engineering consultants and contractors, but will be of interest to anyone involved in the PE  pipe value chain.

Hydrogen transport through  PE100 pipesHydrogen transport through PE100 pipes

Kiwa Technology B.V. had a presentation at last advisory board meeting in Amsterdam , september 9th, on presented Hydrogen transport trough PE 100 pipes

PPXX Amsterdam, September 8th 2021PPXX Amsterdam, September 8th 2021

PE 100+ presented the advantages of PE 100 pipes by showing Case studies from different regions of the globe.

PE100+ and LinkedIn – a new channel for a more intensive exchangePE100+ and LinkedIn – a new channel for a more intensive exchange

PE100+ has looked into further improving our interaction with the stakeholders of the pipe value chain. One driver was certainly the Covid pandemic which dramatically reduced opportunities for...

Test (RRT) on the accelerated notch pipe test (aNPT)Accelerated Notch test

A Round Robin Test (RRT) on the accelerated notch pipe test (aNPT) was organised by PE100+ among 6 laboratories. These RRT results will be used in the standardisation committees to further improve...

PE100+ presenting on design and application of PE100 pipes in trenchless applications at Würzburger KunststoffrohrtagungPE100+ presenting on design and application of PE100 pipes in trenchless applications at Würzburger Kunststoffrohrtagung

After a delay caused by the Corona Pandemic, SKZ was in the position to organise the Würzburger Kunststoffrohrtagung on June 22 and 23 in Würzburg, Germany.  At this forum for plastics piping...



Members of the Association

BOREALISBOROUGEFormosa Plastics CorporationINEOS O&PIRPCKazanorgsintez PJSCKorea Petrochemical IND. Co., LTD (KPIC)LyondellBasellPetroChina Dushanzi Petrochemical CompanyPRIME POLYMERSABICSCG Chemicals & Thai PolyethyleneSinopecTASNEE

Top articles

Why choose PE compounds for pressure pipe ?

Simplicity or consistency The simplest way for any polymer producer to operate is to produce natural pellets for a wide range of applications...

Quality Materials List

PE100+ Quality Materials List is valid until December 2022. It is available online and a PDF version can be downloaded.

What range of pipe diameters is available?

PE100 can be manufactured in a wide range of polyethylene pipe diameters from 16mm to 2000mm. Even larger diameters are possible with the development...

What is SDR pipe and how does it influence the pressure rating of the pipe?

SDR pipe : "Standard Dimensional Ratio" The SDR pipe is the "Standard Dimensional Ratio" and refers to the geometry of the pipe. SDR is defined as...

Testing methods

Creep rupture strength - Internal pressure test Constant internal pressure at constant temperature The internal pressure test is standardised in ISO...

Pipe Bursting and Splitting

PIPE BURSTING / SPLITTING - TECHNIQUE Pipe bursting and pipe splitting are trenchless methods used to replace existing pipelines with PE100 in the...

Pipe Reaming

PIPE REAMING - TECHNIQUE Pipe reaming, also known as pipe eating, is a trenchless pipe replacement technique that removes the host pipe while at the...

Test Requirements

Requirements of the PE 100+ Association Firstly, the ready made compounds must conform to EN 1555-1 and ISO 4437, or EN 12201-1 and ISO 4427. Fully...

Webinar : Benefits of PE100+ Material and their use in Trenchless TechnologyWebinar : Benefits of PE100+ Material and their use in Trenchless Technology

On march 10th, was held the PE 100+ ASSOCIATION first webinar. The webinar was a great success and attracted a large audience. 

TOP