Münchner Kunststoffrohrtage will take place on March 7th and 8th in Munchen. At this international forum for plastics piping systems, PE100+ will present its latest No-Dig Technical Guide, sharing...
Press release about launching online assistant for trenchless pressure pipes installationPE 100+ Association published a press release about launching online an assistant for trenchless pressure pipes installation
The 2016 No-Dig Live exhibition organised by the UK Society for Trenchless technology (UKSTT) took place in Peterborough on 20-22 September. This biennial exhibition includes an outdoor area where...
A large industry panel from several countries outside and inside Europe together with 2 local guests came together for the 17th Advisory Board Meeting held on May 31st 2016 in the city of Lisbon. ...
On Sept. 21-22, the 4 th China International Plastics Pipe Conference was successfully held in Shanghai
The 2015 ISTT International No-Dig Conference was held in Istanbul from 28th to 30th September.
PE100+ To Launch Online Technical Guide for Trenchless TechnologyThe PE100+ Association has sponsored the development of an Online Guide to the Use of PE100 in Trenchless Technology Applications.
Members of the Association
Top articles
PE100+ position letter on ANPT
(SCG) resistance on pipes for pressure applications since many years. With the introduction of PE 100-RC materials in EN 1555, EN 12201 and ISO...
PE 100-RC+ Quality Materials List
PE 100-RC+ materials have become an essential and well established sub-family of PE 100 compounds. They have a higher stress crack resistance and...
PE 100+ association leads permeation tests for H2 ready certification
A number of gas utilities and grid owners have approached the PE 100+ association regarding the suitability of PE 100 pipe systems for the...
Why choose PE compounds for pressure pipe ?
Simplicity or consistency There are two approaches to PE100 pipe manufacture: Fully compounded. The polymer producer manufactures and supplies to...
PE100+ Quality Materials List
PE100+ Quality Materials List is valid until December 2025. It is available online and a PDF version can be downloaded at the bottom of this page.
Testing methods
Creep rupture strength - Internal pressure test Constant internal pressure at constant temperature The internal pressure test is standardised in ISO...
Pipe Reaming
PIPE REAMING - TECHNIQUE Pipe reaming , also known as pipe eating , is a trenchless pipe replacement technique that removes the host pipe while at...
Pipe Bursting and Splitting
PIPE BURSTING / SPLITTING - TECHNIQUE Pipe bursting and pipe splitting are trenchless methods used to replace existing pipelines with PE100 or...
What range of pipe dimensions is available?
PE100 can be manufactured in a wide range of polyethylene pipe diameters from 16mm to 2000mm. Even larger diameters are possible with the...