Our site uses cookies necessary for its proper functioning. To improve your experience, other cookies may be used: you can choose to disable them. This can be changed at any time via the Cookies link at the bottom of the page.


FIRST USE OF PE100-HT CONDUITS FOR ADVANCING THE CONTAINMENT OF UNDERGROUND HIGH VOLTAGE CABLES

 

Plastic Pipes Conference Association # 2021 Amsterdam

Dr. Holger Brüning, Serge Hascoët, Yann Delanne, Didier Nozahic, Jawdat Mansour, José Santana

RTE operates, maintains and develops the French electricity network, including the High and very High Voltage cable lines. Their network is the largest in Europe and includes over 6400 km of underground HV links operated in 2018. The company is modernizing and developing its network by investing 1.5 billion euros per year between 2015 and 2024. Most of this network study, supply and installation work will be undertaken by companies selected through the Official Journal of the European Union qualification systems. The relatively recent establishment of underground cable lines in rural areas has contributed to the increase in the number of RTE ‘s long (over 20 km) underground High Voltage cable lines. This has generated a strong demand for high quality HDPE conduit pipes that can ensure a safer installation and the containment of a possible cable defect. The increase in the use of HDPE conduits has been supported by the development of a new generation of "PE100-HT" (High Temperature) black compounds developed for use at high operating temperatures and which have been tested at temperatures of up to 110°C. Extrapolation of the ISO9080 [1] regression curves, provided by the resin manufacturer, show that such materials can have a service life in excess of 50 years at temperatures of 60°C as compared to only 6 years for a conventional PE100. The performance of this new material was evaluated and incorporated into Group 5 of the French NF114 Quality Mark [2], a quality system of PE Pipe systems under the governance of an administrating laboratory. PE100-HT conduit pipes are proposed for new RTE high operating temperature projects. The first RTE project for which PE100-HT conduits were selected was IFA2, the interconnection between France and the United Kingdom. This project involved undersea and underground high voltage direct current cable lines between the two countries. Prysmian Power Link was awarded the supply and installation contract for the cables. A critical point was the transition length between subsea and conventional underground buried conditions, where operating temperatures can reach 70°C. PE100-HT conduit pipes were selected to ensure that these critical conduits would have a long operational life. The ‘landing’ was carried out in 2019 with 1500 m of 560mm OD conduit pipes being installed by horizontal directional drilling.

Related keywords : underground high voltage cable lines conduits pipes PE100-HT NF114 Quality Mark electricity network.
Please note that the whole article content is available on PPCA website only :

Related papers

2021 Amsterdam : A COST BENEFIT ANALYSIS OF PVC PIPES RECYCLING

Author(s) : A. Marangoni

The quality of infrastructures is a key driver for maximizing the performance of the utilities networks and minimizing the environmental impacts associated with their operation. The water and sewer pipes are key network elements to guarantee a satisfactory service to the citizens. Their end-of-life management is an...

2021 Amsterdam : A METHODOLOGY TO DETERMINE CHARPY IMPACT STRENGTH OF NOTHCED SPECIMEN CUT FROM PLASTICS PIPES

Author(s) : Li, Yanjun, Xiang, Aimin, Xu, HaiyunBeijing, Xie, Jianling, Ho, Kinman, Xu, HaiyunBeijing

It is necessary to evaluate the impact resistance of plastics pipes as they have the potential to be damaged by hitting or colliding during storage, transportation and installation. As a well-established test method, the Charpy impact strength of unnotched test pieces cut from thermoplastics pipes is determined...

2021 Amsterdam : CHEAPER AND BETTER NETWORKS REALISED WITH PRACTICAL DESIGN SOFTWARE

Author(s) : Andreas Moerman, Flip van der Valk, Mirjam Blokker KWR, Tjakko Haaijer, Jan Vreeburg,

Drinking water companies with ageing networks are facing vast amounts of drinking water network reconstructions during the coming decades. This development coincides with the energy transition, which puts pressure on the available space underground. These external drivers give drinking water companies an opportunity...

2021 Amsterdam : CONFIRMATION OF LONG SERVICE LIVES OF PE-PIPES UNDER HIGHER TEMPERATURES APPLYING CONVENTIONAL OVEN TESTS AND MODERN HIGH-PRESSURE AUTOCLAVE TESTS

Author(s) : Anja Armani, Helmut Zanzinger

PE-pipes are used in applications at temperatures higher than 40°C and long service lives like drainage pipes in landfill basal lining systems, drainage pipes in tunnels with high cover heights, geothermal applications, power plant technology, mining, underground cable protection pipes for power lines for...

2021 Amsterdam : DESIGN OF A DISTRIBUTED STRAIN MONITORING SYSTEM FOR HDPE WATER PIPELINES CROSSING AN EARTHQUAKE FAULT

Author(s) : Peter Hubbard, Linqing Luo, Andrew Yeskoo, Kenichi Soga, Krista (Moita) Araica, Gus Cicala, Marshall McLeod

Seismically active faults pose a risk to buried water pipelines that can be complicated to quantify. Fault type, slip rate, pipeline geometry, and soil conditions all factor into a complex soil-pipeline interaction. For critical pipelines that cross faults, high-density polyethylene (HDPE) has become an attractive...

2021 Amsterdam : DESIGN OF LARGE DIAMETER BURIED PIPES

Author(s) : Anders Andtbacka, Peter Sejersen

In the late nineties a study of the behavior of buried thermoplastics pipes was carried out. The project had input and participants from both the plastic pipe industry as well as from external organizations. Six external leading experts in the field of pipeline design, not necessarily plastics pipes design, have been...

2021 Amsterdam : DEVELOPMENT OF A RAPID AND INNOVATIVE IN-FACTORY PROCEDURE FOR TESTING THE PERFORMANCES OF PE PIPES CONTAINING VARIOUS PROPORTIONS OF RECYCLED POLYMER MATERIAL

Author(s) : Dominique GUEUGNAUT, Pascal AUSSANT, Romuald BOUAFFRE, Myriam BECHROURI

Concerns regarding the environment and sustainable development have revived interest in the reprocessing and re-use of polymer materials from manufactured objects that have reached the end of their operating life. Within this framework, formal professional agreements have been put in place at global level under the...

2021 Amsterdam : EVALUATION OF MECHANICAL PROPERTIES AND LONG- TERM DURABILITY OF AGED POLYETHYLENE PIPES FOR GAS DISTRIBUTION

Author(s) : Shuhei Nishida, Shintaro Iwasaki, Hidefumi Yamanaka, Takahiro Kasatani

Polyethylene pipelines have been used for natural gas service applications for over 40 years in Japan. It is thought that they will continue to be used widely for many years. Therefore, it is important to confirm the conditions of the existing pipelines being used for the long term. In this study, polyethylene pipes...

2021 Amsterdam : FINITE ELEMENT METHOD (FEM) USED TO SIMULATE THE STRESS/STRAIN OF THE POINT LOAD TEST (PLT) IN A BROADER STUDY TO SUPPORT THE FUTURE ISO TEST STANDARD

Author(s) : S. Nestelberger, J. Cheng

The Point Load Test (PLT) [‎ 1, ‎ 2] was designed to simulate the SCG (slow crack growth) failure initiated by a rock pressing into the exterior wall of a polymer pipe. Today’s PE materials sustain long PLT testing times, due to its high SCG resistance design. Consequently, an accelerated “PLT+” with the support of...

2021 Amsterdam : GROWTH IN THE USE OF POLYETHYLENE PIPES IN MEA FOR NATURAL GAS UTILITY DISTRIBUTION

Author(s) : Sultan Alkendi, Mohamed Jaber, Ahmed Atef Helal

The current push to reduce governmental energy subsidies has moved the need to adapt utility gas distribution networks toward the top of Middle Eastern governmental near-term agendas. Egypt is at the forefront of this push towards gasification. The United Arab Emirates has started on the path towards gasification...

2021 Amsterdam : HYDROGEN TRANSPORT IN POLYMER PIPES FOR NATURAL GAS DISTRIBUTION – TEN YEARS OF EXPERIENCE

Author(s) : Stephan Kneck, Henrik Iskov

It has become ever clearer that the resources of natural gas are an energy source, which will be less important in the future due to limitations in use of natural reserves. In order to prepare for the future the gas industry is looking at the alternative fuel gases, one such fuel gas is hydrogen. In order to prepare...

2021 Amsterdam : INNOVATIVE MILLIMETER WAVE TECHNOLOGY FOR MEASURING THE PIPE WALL THICKNESS EARLY IN THE EXTRUSION PROCESS

Author(s) : Christian Schalich

Plastic pipes for infrastructure and building applications are precisely specified with regards to wall thickness and diameter. Pipe manufacturers use different measuring methods in order to ensure the required dimensional accuracy and maintain a constant high quality. This paper introduces a measuring system based on...

2021 Amsterdam : MULTILAYER POLYMER PIPES – THE INFLUENCE OF RESIDUAL STRESS ON FATIGUE LIFETIME

Author(s) : Lukas Travnicek, Pavel Hutar, Jan Poduska, Andreas Frank, Florian Arbeiter, Jaroslav Kucera, Jiri Sadilek, Gerald Pinter, Lubos Nahlik

The application of recycled material in pressure piping systems has been considered lately – it was suggested, that the recycled polyethylene could be used as a part of a multilayer pipe together with virgin material. This type of pressure pipes is not availableon the market yet, so their properties can be only...

2021 Amsterdam : MUTUAL RECOGNITION OF THE CERTIFICAT ION SCHEMES IN EUROPE

Author(s) : Horst Stimmelmayr, Peter Sejersen

The voluntary certification scheme for plastic multilayer piping systems for hot and cold drinking water inside buildings is a joint effort of two key European organizations. It was initiated in close cooperation with the Brussels based European trade association of plastic pipe and fittings manufacturers, TEPPFA....

2021 Amsterdam : PIPE FOR FIRE EXTINGISHING DEVICE

Author(s) : Yoshikatsu NISHIDA, Yukihisa YAMADA, Masaya IWASAKI, Masaru TOMOBE, Yuichi KOUGA

By using polyethylene as the main material for this fire extinguishing device pipe, a resin-made fire extinguishing device is developed that is maintenance-free for eight years and can cope with the abnormal heat generation of lithium ion batteries. In order to prevent the internal extinguishant from permeating and...

2021 Amsterdam : PLASTIC PIPES FOR WATER DRAINAGE IN RAIL- AND MOTORWAY TUNNELS – A MAJOR CHALLENGE

Author(s) : Florian Arbeiter, Tobias Schachinger, Stefanie Eichinger, Gisbert Rieß, Michael Stur, Michael Steiner, Florian Saliger

Plastic pipes are of outstanding importance for the distribution of potable and process waters, oil and gas, as well as for sewer and waste water disposal. However, plastic pipes are also used in many other technical areas. Especially in European countries with mountainous regions, such as Austria, Switzerland, Italy...

2021 Amsterdam : PVC Pipes TRAINING PACKAGE: 2020 UPDATE!

Author(s) : Sylvie Famelart, Vincent. Stone

In order to deliver to the market reliable and consistent information about PVC and the different PVC pipe solutions, a Training Package was developed a few years ago. The package was made up of a set of standalone PowerPoint slides, providing information on PVC-U and PVC-C pipe systems. Information on both general...

2021 Amsterdam : PVC PIPES WITH SUPERIOR ROOT INTRUSION RESISTANCE

Author(s) : Argnani Claudio, Ing. Gianpaolo Contarini

...Clogging of the pipes can be experienced in sewer systems after a short period of service, due to the intrusion of roots from plants and trees. Plants, and in particular their roots, are attracted by the water flowing inside the pipes. These roots will strain the connections between pipes, in particular the sockets...

2021 Amsterdam : RESTRAINED MECHANICAL JOINING DEVICES FOR HDPE PIPE: PERFORMANCE CHARACTERISTICS AND TEST PROTOCOL

Author(s) : Justin Brandt, Mike Griffin, Tony Cuvo

As plastic pipe gains share in new markets and applications, additional joining methods add further value, enabling continued growth for plastic pipes. To date, definitions of a “fit-for-purpose” mechanical joint for High Density Polyethylene (HDPE) pressure piping systems can vary significantly. As such, mechanical...

2021 Amsterdam : TESTING AND EVALUATION OF NANOADDITIVES IN U-PVC PIPES

Author(s) : E. Boccaleri, L. Palin, G. Rombolà, M. Milanesio

In the last decades, research on nanostructured materials as additives for plastics involved several polymeric matrices, but only limited studies and publications involve PVC. In this work, the context of rigid application of PVC (U-PVC) for pipes application was targeted, in order to test and evaluate the structural...

Members of the Association

BOREALISBOROUGEFormosa Plastics CorporationHanwha TotalEnergiesINEOS O&PIRPCKorea Petrochemical IND. Co., LTD (KPIC)LyondellBasellPetroChina Dushanzi Petrochemical CompanyPRIME POLYMERSABICSCG Chemicals & Thai PolyethyleneSinopecTASNEE
TOP