Our site uses cookies necessary for its proper functioning. To improve your experience, other cookies may be used: you can choose to disable them. This can be changed at any time via the Cookies link at the bottom of the page.


An Industry Initiative Addressing The Global Water Challenge

 

Toogood

Fundamentals # 2008 Budapest

Fresh water and sanitation are vital to mankind and clearly pollution, rising population and climate change are putting our systems and our futures at risk. Borouge and Borealis have recognised this as the most vital challenge facing our world and have launched the “Water for the World” programme where by working with other partners we aim to deliver sustainable solutions for fresh water and sanitation. This paper shows that there are solutions to these challenges, in many situations using modern plastics materials but it also requires a will and some dedicated groups of people to make it happen.

Related keywords : Water, sanitation, pipes, world, people, systems.
Please note that the whole article content is available on PPCA website only


Related papers

2021 Amsterdam : A COST BENEFIT ANALYSIS OF PVC PIPES RECYCLING

Author(s) : A. Marangoni

The quality of infrastructures is a key driver for maximizing the performance of the utilities networks and minimizing the environmental impacts associated with their operation. The water and sewer pipes are key network elements to guarantee a satisfactory service to the citizens. Their end-of-life management is an...

2021 Amsterdam : A METHODOLOGY TO DETERMINE CHARPY IMPACT STRENGTH OF NOTHCED SPECIMEN CUT FROM PLASTICS PIPES

Author(s) : Li, Yanjun, Xiang, Aimin, Xu, HaiyunBeijing, Xie, Jianling, Ho, Kinman, Xu, HaiyunBeijing

It is necessary to evaluate the impact resistance of plastics pipes as they have the potential to be damaged by hitting or colliding during storage, transportation and installation. As a well-established test method, the Charpy impact strength of unnotched test pieces cut from thermoplastics pipes is determined...

2021 Amsterdam : APPLICATIONS OF HDPE PIPING TO SUPPLY WATER TO RURAL VILLAGES IN MOROCCO

Author(s) : Donald Swen, Leanne Pichay, Nicholas Vallin, Alice Wu, Jim Johnston

In the rural commune of Ait Bayoud, Morocco, two of the most remote villages in the area, Ilguiloda and Izgouaren, live with water scarcity. To meet their water needs, women and children walk several kilometers to the nearest spring each day, often multiple times a day. Consequently, children cannot attend school...

2021 Amsterdam : CHEAPER AND BETTER NETWORKS REALISED WITH PRACTICAL DESIGN SOFTWARE

Author(s) : Andreas Moerman, Flip van der Valk, Mirjam Blokker KWR, Tjakko Haaijer, Jan Vreeburg,

Drinking water companies with ageing networks are facing vast amounts of drinking water network reconstructions during the coming decades. This development coincides with the energy transition, which puts pressure on the available space underground. These external drivers give drinking water companies an opportunity...

2021 Amsterdam : DESIGN OF LARGE DIAMETER BURIED PIPES

Author(s) : Anders Andtbacka, Peter Sejersen

In the late nineties a study of the behavior of buried thermoplastics pipes was carried out. The project had input and participants from both the plastic pipe industry as well as from external organizations. Six external leading experts in the field of pipeline design, not necessarily plastics pipes design, have been...

2021 Amsterdam : DEVELOPMENT OF A RAPID AND INNOVATIVE IN-FACTORY PROCEDURE FOR TESTING THE PERFORMANCES OF PE PIPES CONTAINING VARIOUS PROPORTIONS OF RECYCLED POLYMER MATERIAL

Author(s) : Dominique GUEUGNAUT, Pascal AUSSANT, Romuald BOUAFFRE, Myriam BECHROURI

Concerns regarding the environment and sustainable development have revived interest in the reprocessing and re-use of polymer materials from manufactured objects that have reached the end of their operating life. Within this framework, formal professional agreements have been put in place at global level under the...

2021 Amsterdam : EFFECT OF CHLORINATED WATER ON THE FATIGUE CRACK GROWTH RESISTANCE OF POLYETHYLENE COMPOUNDS WITH RECYCLATE CONTENT FOR PIPE APPLICATIONS

Author(s) : Paul J. Freudenthaler, Joerg Fischer, Mathias Eder, Reinhold W. Lang

For controlled water disinfection, typically chlorine is used and preliminary studies demonstrate its aging and crack growth acceleration effects on polyolefin pipe materials [1, 2]. Although the use of recycled plastics is not prohibited in some ISO standards for polyolefin piping systems [3–5], only small amounts...

2021 Amsterdam : EVALUATION OF MECHANICAL PROPERTIES AND LONG- TERM DURABILITY OF AGED POLYETHYLENE PIPES FOR GAS DISTRIBUTION

Author(s) : Shuhei Nishida, Shintaro Iwasaki, Hidefumi Yamanaka, Takahiro Kasatani

Polyethylene pipelines have been used for natural gas service applications for over 40 years in Japan. It is thought that they will continue to be used widely for many years. Therefore, it is important to confirm the conditions of the existing pipelines being used for the long term. In this study, polyethylene pipes...

2021 Amsterdam : FIRST USE OF PE100-HT CONDUITS FOR ADVANCING THE CONTAINMENT OF UNDERGROUND HIGH VOLTAGE CABLES

Author(s) : Dr. Holger Brüning, Serge Hascoët, Yann Delanne, Didier Nozahic, Jawdat Mansour, José Santana

RTE operates, maintains and develops the French electricity network, including the High and very High Voltage cable lines. Their network is the largest in Europe and includes over 6400 km of underground HV links operated in 2018. The company is modernizing and developing its network by investing 1.5 billion euros per...

2021 Amsterdam : HISTORY OF HDPE USE AT THE CITY OF PALO ALTO FOR POTABLE WATER DISTRIBUTION

Author(s) : Greg Scoby, PE

This paper will detail the steps taken during adoption of HDPE for potable water systems improvements including material justification, creation of related specifications, investigation of available piping components, qualification of contractors and the construction/inspection of related systems. The City of...

2021 Amsterdam : HYDROGEN TRANSPORT IN POLYMER PIPES FOR NATURAL GAS DISTRIBUTION – TEN YEARS OF EXPERIENCE

Author(s) : Stephan Kneck, Henrik Iskov

It has become ever clearer that the resources of natural gas are an energy source, which will be less important in the future due to limitations in use of natural reserves. In order to prepare for the future the gas industry is looking at the alternative fuel gases, one such fuel gas is hydrogen. In order to prepare...

2021 Amsterdam : INNOVATIVE MILLIMETER WAVE TECHNOLOGY FOR MEASURING THE PIPE WALL THICKNESS EARLY IN THE EXTRUSION PROCESS

Author(s) : Christian Schalich

Plastic pipes for infrastructure and building applications are precisely specified with regards to wall thickness and diameter. Pipe manufacturers use different measuring methods in order to ensure the required dimensional accuracy and maintain a constant high quality. This paper introduces a measuring system based on...

2021 Amsterdam : LARGE DIAMETER & THICK WALL HDPE PIPES PRODUCED AND DEVELOPED IN THE MIDDLE EAST – 3 CASE STORIES

Author(s) : Eng. Grigorios Vigellis, Eng. Mohamed Hageb

Continuous development and innovation in the production of plastic pipes made by high density polyethylene (HDPE) has enabled the industry to produce much larger diameter systems than ever believed possible. The enablers for production of such large plastic pipes are three main pillars: continuous innovation...

2021 Amsterdam : LONG-TERM DURABILITY OF NEW POLYMER COMPOSITE VALVES FOR DRINKING WATER NETWORKS

Author(s) : Jennifer Ravereau, Jose Teixeira Pinto, Malena Bernabeu, Jose Alacid, Jean-Philippe Le Goff, Frederic Mohier, Benjamin Rabaud

Drinking water network fittings such as valves are made of brass materials known to be robust over long periods. Due to the gradual inflation metallic raw material costs, composite plastic valves have grown in market share. Uncertainties remain, however, on their long-term reliability. The aim of this work is to...

2021 Amsterdam : MODELLING THE MIGRATION FROM PVC-U PIPES INTO DRINKING WATER

Author(s) : C. Losher and P.V. Mercea

In the framework of the German Environmental Agency (UBA) requirements of plastic articles in contact with drinking water (KTW-BWGL-guideline), the compliance is verified by comparing so-called “expected concentrations at tap”, C tap , of substances contained in the plastics with specific limits in drinking water...

2021 Amsterdam : MULTILAYER POLYMER PIPES – THE INFLUENCE OF RESIDUAL STRESS ON FATIGUE LIFETIME

Author(s) : Lukas Travnicek, Pavel Hutar, Jan Poduska, Andreas Frank, Florian Arbeiter, Jaroslav Kucera, Jiri Sadilek, Gerald Pinter, Lubos Nahlik

The application of recycled material in pressure piping systems has been considered lately – it was suggested, that the recycled polyethylene could be used as a part of a multilayer pipe together with virgin material. This type of pressure pipes is not availableon the market yet, so their properties can be only...

2021 Amsterdam : MUTUAL RECOGNITION OF THE CERTIFICAT ION SCHEMES IN EUROPE

Author(s) : Horst Stimmelmayr, Peter Sejersen

The voluntary certification scheme for plastic multilayer piping systems for hot and cold drinking water inside buildings is a joint effort of two key European organizations. It was initiated in close cooperation with the Brussels based European trade association of plastic pipe and fittings manufacturers, TEPPFA....

2021 Amsterdam : PLASTIC PIPES FOR WATER DRAINAGE IN RAIL- AND MOTORWAY TUNNELS – A MAJOR CHALLENGE

Author(s) : Florian Arbeiter, Tobias Schachinger, Stefanie Eichinger, Gisbert Rieß, Michael Stur, Michael Steiner, Florian Saliger

Plastic pipes are of outstanding importance for the distribution of potable and process waters, oil and gas, as well as for sewer and waste water disposal. However, plastic pipes are also used in many other technical areas. Especially in European countries with mountainous regions, such as Austria, Switzerland, Italy...

2021 Amsterdam : POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) IN LOW TEMPERATURE DISTRICT HEATING SYSTEMS

Author(s) : Alex Stolarz, Klaus Grønnegaard Lauridsen

Low temperature District Heating – COOL DH – addresses the challenges of the upcoming decades in the energy sector for new housing developments. Energy efficiency is an important aspect of modern building construction. Improved building insulation and other technologies result in lower heat demand and enable new...

2021 Amsterdam : PRESSURE PIPELINE MADE OF HDPE – DETERMINATION OF REMAINING LIFETIME AFTER 47 YEARS OF OPERATION IN LAKE OSSIACH (CARINTHIA, AUSTRIA)

Author(s) : Ulrich Schulte, Dr. -Ing. Joachim Hessel

In order to protect the Austrian lakes effectively against the discharge of effluent, a 13 km long pressure pipeline made of high density polyethylene was laid on the bottom of Lake Ossiach back in 1971. The DN355 to DN200 pipes were produced from a first generation HDPE-compound. The classification would have been...

Members of the Association

BOREALISBOROUGEFormosa Plastics CorporationINEOS O&PIRPCKazanorgsintez PJSCKorea Petrochemical IND. Co., LTD (KPIC)LyondellBasellPetroChina Dushanzi Petrochemical CompanyPRIME POLYMERSABICSCG Chemicals & Thai PolyethyleneSinopecTASNEE
Webinar : Benefits of PE100+ Material and their use in Trenchless TechnologyWebinar : Benefits of PE100+ Material and their use in Trenchless Technology

On march 10th, was held the PE 100+ ASSOCIATION first webinar. The webinar was a great success and attracted a large audience. 

TOP