Our site uses cookies necessary for its proper functioning. To improve your experience, other cookies may be used: you can choose to disable them. This can be changed at any time via the Cookies link at the bottom of the page.


Detection

HDPE Pipe technical guidance (High quality Polyethylene Pipes)
 

How can I verify the location of underground PE pipes?

As for any underground pipeline, reference should first be made to the Construction Records held by the pipeline operator. The construction records should contain details of pipe location, depth of burial, location of other underground plant and any other relevant information. The information shown on the construction records should be verified on site. Survey of appurtenances at the surface, such as chamber covers, as well as limited potholing to verify depth, may be necessary. Remote pipe...

Is it possible to detect buried PE pipes from the surface?

Yes. Methods have been developed for detecting buried PE pipes from the surface but each has its limitations which need to be understood when deciding which to use. The simplest method of detecting PE pipe is when laying the pipe to provide a tracer wire along the pipe route. The tracer wire can also be incorporated into marker tape, which is laid above the pipeline during construction. The tracer wire can then be detected above ground by conventional electromagnetic pipe detection equipment. A...


Members of the Association

BOREALISBOROUGEFormosa Plastics CorporationHanwha TotalEnergiesINEOS O&PIRPCKorea Petrochemical IND. Co., LTD (KPIC)LyondellBasellPetroChina Dushanzi Petrochemical CompanyPRIME POLYMERSABICSCG Chemicals & Thai PolyethyleneSinopecTASNEE

Top articles

PE100+ position letter on ANPT

(SCG) resistance on pipes for pressure applications since many years. With the introduction of PE 100-RC materials in EN 1555, EN 12201 and ISO...

PE 100-RC+ Quality Materials List

PE 100-RC+ materials have become an essential and well established sub-family of PE 100 compounds. They have a higher stress crack resistance and...

PE 100+ association leads permeation tests for H2 ready certification

A number of gas utilities and grid owners have approached the PE 100+ association regarding the suitability of PE 100 pipe systems for the...

Why choose PE compounds for pressure pipe ?

Simplicity or consistency The simplest way for any polymer producer to operate is to produce natural pellets for a wide range of applications...

PE100+ Quality Materials List

PE100+ Quality Materials List is valid until December 2024. It is available online and a PDF version can be downloaded at the bottom of this page.

What range of pipe diameters is available?

PE100 can be manufactured in a wide range of polyethylene pipe diameters from 16mm to 2000mm. Even larger diameters are possible with the development...

What is SDR pipe and how does it influence the pressure rating of the pipe?

SDR pipe : "Standard Dimensional Ratio" The SDR pipe is the "Standard Dimensional Ratio" and refers to the geometry of the pipe. SDR is defined as...

Standard test methods

Creep rupture strength - Internal pressure test Constant internal pressure at constant temperature The internal pressure test is standardised in ISO...

Pipe Bursting and Splitting

PIPE BURSTING / SPLITTING - TECHNIQUE Pipe bursting and pipe splitting are trenchless methods used to replace existing pipelines with PE100 in the...

TOP