Members Meeting 22/02/2005At the annual Member meeting on February 22nd 2005, the PE100+ Association elected Robin Bresser, Borealis Pipe Marketing Manager, as its new President.
Annual PE100+ Advisory Committee Meeting - 2004PE100+ Association issues new Positive List of Materials15 July 2002At the 15th of July 2002, the PE100+ Association publishes the updated "PE100+ Association's Positive List of Materials". In total,...
Annual PE100+ Advisory Committee Meeting - 200314 May, 2003Annual PE100+ Advisory Committee MeetingRadisson SAS Palais Hotel, Vienna, AustriaTwo specific topics on environmental related issues:EAS and Chlorine will be discussed in addition to...
PE100+ Association's Board of Directors re-elected - 2003On February 19th, the annual PE100+ Association member meeting was held inBrussels. The previous board members were re-elected.
PE100+ Association presents its future ambitions at Wiesbadener Kunststoffrohrtage 2002During the Wiesbadener Kunststoffrohrtage 2002 on 25-26th April 2002, the PE100+ Association presents its future ambitions by a presentation given by Dr. Dieter Bilda.
Members of the Association
Top articles
PE100+ position letter on ANPT
(SCG) resistance on pipes for pressure applications since many years. With the introduction of PE 100-RC materials in EN 1555, EN 12201 and ISO...
PE 100-RC+ Quality Materials List
PE 100-RC+ materials have become an essential and well established sub-family of PE 100 compounds. They have a higher stress crack resistance and...
PE 100+ association leads permeation tests for H2 ready certification
A number of gas utilities and grid owners have approached the PE 100+ association regarding the suitability of PE 100 pipe systems for the...
Why choose PE compounds for pressure pipe ?
Simplicity or consistency The simplest way for any polymer producer to operate is to produce natural pellets for a wide range of applications...
PE100+ Quality Materials List
PE100+ Quality Materials List is valid until December 2024. It is available online and a PDF version can be downloaded at the bottom of this page.
What range of pipe diameters is available?
PE100 can be manufactured in a wide range of polyethylene pipe diameters from 16mm to 2000mm. Even larger diameters are possible with the development...
What is SDR pipe and how does it influence the pressure rating of the pipe?
SDR pipe : "Standard Dimensional Ratio" The SDR pipe is the "Standard Dimensional Ratio" and refers to the geometry of the pipe. SDR is defined as...
Standard test methods
Creep rupture strength - Internal pressure test Constant internal pressure at constant temperature The internal pressure test is standardised in ISO...
Pipe Bursting and Splitting
PIPE BURSTING / SPLITTING - TECHNIQUE Pipe bursting and pipe splitting are trenchless methods used to replace existing pipelines with PE100 in the...