Iso 标准

ISO1167-1:2006*

ISO1167-2:2006*

ISO1167-3:2007*

ISO1167-4:2007*

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure

- Part 1: General method

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure

- Part 2: Preparation of pipe test piecesThermoplastics pipes, fittings and assemblies for the conveyance of fluids –

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure

- Part 3: Preparation of componentsThermoplastics pipes, fittings and assemblies for the conveyance of fluids –

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure

- Part 4: Preparation of assemblies

ISO 4433:1997

Thermoplastics pipes - Resistance to chemical fluids - Classification: Part 1: Immersion test method; Part 2: Polyolefin pipes

ISO 4437:2007 1

Buried polyethylene (PE) pipes for the supply of gaseous fuels - Metric series – Specification

ISO 9080:2012*

Plastics piping and ducting systems - determination of long term hydrostatic strength of thermoplastics materials in pipe form by extrapolation

ISO 9623:1997

PE/metal and PP/metal adapter fittings for pipes for fluids under pressure - Design lengths and size of threads - Metric series

ISO 9624:1997

Thermoplastics pipes for fluids under pressure - Mating dimensions of flange adapters and loose backing flanges

ISO 11414:2009

Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion

ISO 12162:2009*

Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation - overall Service (Design) coefficient

ISO 12176-1:2012

Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion

ISO 12176-2:2008

Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion

ISO 12176-3:2011

Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 3: Operator's badge

ISO 12176-4:2003

Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 4: Traceability coding

ISO 13477:2008*

Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test)

ISO 13478:2007*

Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST)

ISO 13479:2009*

Polyolefin pipes for the conveyance of fluids - Determination of the resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test).

ISO 13480:1997

Polyethylene pipes - Resistance to slow crack growth - Cone test method

ISO 13761:1996

Plastics pipes and fittings - Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20° C

ISO 14040:2006

Environmental management -- Life cycle assessment -- Principles and framework

ISO 14236:2000

Plastics pipes and fittings - Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems

ISO/TR10358:1993

Plastics pipes and fittings - Combined chemical resistance classification table

IS0/TR11647:1996

Fusion compatibility of polyethylene (PE) pipes and fittings

ISO/TS 10839:2000

Polyethylene pipes and fittings for the supply of gaseous fuels - Code of practice for design, handling and installation

EN 1555-1:2010

EN 1555-2:2010

EN 1555-3:2010

EN 1555-4:2011

EN 1555-5:2010

Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) –

Part 1: General Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)

Part 2: PipesPlastics piping systems for the supply of gaseous fuels. Polyethylene (PE) –

Part 3: Fittings Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) –

Part 4: ValvesPlastics piping systems for the supply of gaseous fuels. Polyethylene (PE) –

Part 5: Fitness for purpose

EN 12201-1:2011

EN 12201-2:2011

EN 12201-3:2011

EN 12201-4: 2012

EN 12201-5: 2011

Plastics piping systems for water supply, and for drainage and

sewerage under pressure - Polyethylene (PE) –

Part 1: General

Part 2:Pipes

Part 3: Fittings

Part 4: Valves

Part 5: Fitness for purpose

Standards referred to in the PE Pipe Model

The plastics pipes industry revolves around specifications and standards for the products and test methods to verify performance. Pipe systems are one of the most critical applications for thermoplastics materials with a design lifetime of 50 years and expected lifetime in excess of 100 years. Products must be fit for purpose and the end user needs confidence in the product in order to specify them. Specifications and dimensions must be universal and methods of test need to be standardised. The industry has put in a great deal of effort over many years to develop reliable methods.

Product and test method standards are developed by CEN for Europe and ISO for global use. ISO/TC 138 and CEN/TC 155 Technical Committees are responsible for ISO and EN standards for plastics pipes systems respectively. The TCs are split into Sub-committees and Working Groups for specific applications and test methods. It takes several years to develop a standard to publication and these are reviewed every 3 to 5 years and revised if required.

ISO 4427-1:2007, Plastics piping systems – Polyethylene (PE) pipes and fittings for water supply – Part 1: General

ISO 4427-2:2007, Plastics piping systems – Polyethylene (PE) pipes and fittings for water supply – Part 2: Pipes

ISO 4427-3:2007, Plastics piping systems – Polyethylene (PE) pipes and fittings for water supply – Part 3: Fittings

ISO 4427-5:2007, Plastics piping systems – Polyethylene (PE) pipes and fittings for water supply – Part 5: Fitness for purpose

1 ISO 4437 is being revised in the 5 part format and expected to be published in 2014, ie Part 1 – General, Part 2 – Pipes, Part 3 – Fittings, Part 4 – Valves, Part 5 – Fitness for purpose.

Other useful reference standards for PE:

ISO 15494:2003: Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PERT), crosslinked polyethylene (PE-X), polypropylene (PP) — Specifications for components and the system - Metric series (In revision)

ISO 472:2013*, Plastics — Vocabulary

ISO 1043-1:2011*, Plastics ― Symbols and abbreviated terms ― Part 1: Basic polymers and their special characteristics

ISO 1133-1:2011*, Plastics ― Determination of the melt mass-flow rate (MFR) and the melt volume-fl ow rate (MVR) of thermoplastics – Part 1: Standard method

ISO 1183-1:2012*, Plastics ― Methods for determining the density of non-cellular plastics ― Part 1: Immersion method, liquid pyknometer method and titration method

ISO 1183-2:2004*, Plastics ― Methods for determining the density of non-cellular plastics ― Part 2: Density gradient column method)

ISO 2505:2005*, Thermoplastics pipes ― Longitudinal reversion ― Test method and parameters

ISO 3126:2005*, Plastics piping systems ― Plastics components ― Determination of dimensions

ISO 4065:1996, Thermoplastics pipes ― Universal wall thickness table

ISO 6259-1:1997*, Thermoplastics pipes ― Determination of tensile properties ― Part 1: General test method

ISO 6259-3:1997, Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes

ISO 6964:1986, Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification

ISO 9969:2007*, Thermoplastics pipes — Determination of ring stiffness

ISO 10838-1:2000 1), Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels ― Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm

ISO 10838-2:2000 1), Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels ― Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm

ISO 10838-3:2001 1), Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels ― Part 3: Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63 mm

ISO 11357-6:2008, Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

ISO 11413:2008, Plastics pipes and fittings ― Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting

ISO 11922-1:1997, Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series

ISO 13950:2007, Plastics pipes and fittings — Automatic recognition systems for electrofusion joints

ISO 13951:2001, Plastics piping systems — Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading

ISO 13953:2001, Polyethylene (PE) pipes and fittings ― Determination of the tensile strength and failure mode of test pieces from a butt-fused joint

ISO 13954:1997, Plastics pipes and fittings ― Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm

ISO 13955:1997, Plastics pipes and fittings ― Crushing decohesion test for polyethylene (PE) electrofusion assemblies

ISO 13956:2010, Plastics pipes and fittings ― Determination of cohesive strength ― Evaluation of ductility of fusion joint interface by tear test

ISO 13957:1997, Plastics pipes and fittings ― Polyethylene (PE) tapping tees ― Test method for impact resistance

ISO 13968:2008, Plastics piping and ducting systems —Thermoplastics pipes — Determination of ring flexibility

ISO 15512:2008, Plastics ― Determination of water content

ISO 16871:2003, Plastics piping and ducting systems ― Plastics pipes and fittings ― Method for exposure to direct (natural) weathering

ISO 18553:2002, Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds

ISO 21751:2011, Plastics pipes and fittings — Decohesion test of electrofusion assemblies —Strip-bend test

EN 1716;1997, Plastics piping systems ― Polyethylene (PE) tapping tees ― Test method for impact resistance of an assembled tapping tee

EN 12099:1997, Plastics piping systems — Polyethylene piping materials and components — Determination of volatile content

EN 12106:1997, Plastics piping systems ― Polyethylene (PE) pipes ― Test method for the resistance to internal pressure after application of squeeze-off

EN 12117:1997, Plastics piping systems ― Fittings, valves and ancillaries ― Determination of gaseous flow rate/pressure drop relationships

1) These standards are under revision and will be replaced by ISO 17885

06 / 02 / 09Iso 标准

聚乙烯管材模型中提及的标准

ISO 1167-1:2006

ISO 1167-2:2006

ISO 1167-3:2007

ISO 1167-4:2007

塑料管道系统-热塑性管材-恒温下抗内压的测定

ISO 3663:1976

聚乙烯(PE)压力管材和管件,公制系列-法兰尺寸

ISO 4433:1997

热塑性管材-耐液体化学药品的性能-分类:第1部分:浸入试验;第2部分:聚烯烃管

ISO 4437:2007

输送气体燃料用埋地聚乙烯(PE)管材-公制系列-规范

ISO 9080:2003

塑料管道和导管系统-用外推法测定热塑性管材的长期静液压强度

ISO 9623:1997

压力流体用聚乙烯(PE)/金属和聚丙烯(PP)/金属接头管件-螺纹的设计长度和尺寸-公制系列

ISO 9624:1997

压力流体用热塑性管材-法兰接头和活套法兰的适配尺寸

ISO 12162:2009

压力用热塑性管材和管件-分级和命名-总体使用(设计)系数

ISO 12176-1:2006

塑料管材和管件-聚乙烯系统的熔接设备-第1部分:熔接

ISO 12176-2:2008

塑料管材和管件-聚乙烯系统的熔接设备-第2部分:电熔

ISO 12176-3:2011

塑料管材和管件-聚乙烯系统的熔接设备-第3部分:操作人员的胸卡

ISO 12176-4:2003

塑料管材和管件-聚乙烯系统的熔接设备-第4部分:可追踪性编码

ISO 13477:2008

输送流体用热塑性管材-耐快速裂纹扩展(RCP)的测定-小尺寸静态稳定试验(S4试验)

ISO 13478:2007

输送流体用热塑性管材-耐快速裂纹扩展(RCP)的测定-全尺寸试验(FST)

ISO 13479:2009

输送流体用聚烯烃管材-耐裂纹扩展的测定-有凹口的管材上裂纹缓慢增长的试验方法(切口试验)

ISO 13480:1997

聚乙烯管材-耐慢速裂纹增长-锥形试验方法

ISO 13761:1996

塑料管材和管件-20℃以上使用的聚乙烯管道的压力折减系数

ISO 14236:2000

塑料管材和管件-给水系统中与聚乙烯压力管材一起使用的机械接合压力管件

ISO/TR10358:1993

塑料管材和管件-综合耐化学性能分类表

IS0/TR11647:1996

聚乙烯(PE)管材和管件的可熔焊性

ISO/TS 10839:2000

输送气体燃料用聚乙烯管材和管件-设计、搬运和安装实施规范

EN 1555-1:2010

EN 1555-2:2010

EN 1555-3:2010

EN 1555-4:2010

EN 1555-5:2010

输送气体燃料用塑料管道系统聚乙烯(PE)。

 

ISO国际标准化组织



TOP