Our site uses cookies necessary for its proper functioning. To improve your experience, other cookies may be used: you can choose to disable them. This can be changed at any time via the Cookies link at the bottom of the page.


PE technical guidance
HDPE Pipe technical guidance (High quality Polyethylene Pipes)
 
Construction

What are the bedding requirements for PE pipe?

Quick access

Customers normally advise that trench bottoms should be excavated to provide a reasonably even bed along the pipe length and free of sharp stones or other objects that could damage the pipe. Sand for pipe bedding should be used where possible and soil containing sharp, angular gravel or cobbles should not be used for bedding of PE pipe. The depth of the trench should be suitable to provide the required cover when reinstated.

PE pipes having a protective outer sheath (multi-layer) may be laid in heterogeneous ground without sand bedding thus allowing a wide range of excavated materials to be re-used.

Where the pipe is to be laid through rock or ground of variable consistency, customers normally advise that the trench should be excavated approx. 75mm below its normal depth, and a bedding material placed before the pipe to provide a bed of suitable consistency.

Where the pipe is to be laid through contaminated ground then the soil should be checked to determine if it would bechemically aggressive to PE. If necessary the aggressive material should be removed and imported bedding and backfill should be used.

Related keywords : laying poly pipe, what is bedding material, pipe bedding sand specification, sand bedding for pipe, sand bedding for water pipe, pipe bedding material, pipe bedding, poly pipe layer, bedding in construction

Last update Thursday 31 May 2018

Members of the Association

BOREALISBOROUGEFormosa Plastics CorporationHanwha TotalEnergiesINEOS O&PIRPCKorea Petrochemical IND. Co., LTD (KPIC)LyondellBasellPetroChina Dushanzi Petrochemical CompanyPRIME POLYMERSABICSCG Chemicals & Thai PolyethyleneSinopecTASNEE
TOP